
Leaking Tap Repairs Sydney
Dripping taps, leaking mixers and broken spindles fixed in kitchens, bathrooms, laundries and gardens. The price is fixed before we start.
Request a callback
Leave your details and we ring you back with a time.
Not a confirmed booking yet. We ring you back to confirm a time and the call-out terms. Urgent? Call 1300 301 354. * Offer conditions.
Five stars, wherever Sydney leaves reviews. Tap a badge to read them.
Fixing leaking taps
A dripping tap often comes down to a worn washer or seat in a tap with separate handles, or a worn cartridge in a mixer. We find the cause and replace the worn part, and if the tap still isn’t right, we replace it.
The price is fixed before we start.
Before we arrive
- If water won’t stop running, turn it off at the isolation valve under the sink if there is one, or at the meter, if you can do it safely.
- Note whether it drips from the spout or leaks around the handle or the base.
- Tell us the type of tap: separate handles, or a mixer with one lever.
Recent tap repairs
Kellyville Ridge, September 2026: leaking basin taps fixed with new washers
The customer had a set of basin taps leaking. We isolated the water and removed the spindles, and found the washers were completely worn out, which was causing the leak. We installed new washers and re-seated the tap sets, then put the spindles back in, turned the water back on and cleaned up.

Norwest, October 2026: a broken shower spindle set replaced
The customer called us because the spindle in their shower had broken off. We isolated the water and removed the old spindle set. Then we installed a new set, turned the water back on, tested for leaks and cleaned up.


North Rocks, August 2026: a leaking hose tap replaced and secured
The customer’s hose tap was leaking, and there was no peg holding it and its copper pipe in place. We turned the water off at the meter, removed the old hose tap and installed a new one, then fitted a new peg to secure it. We turned the water back on and tested the tap.


What our customers say
“William from All Day Plumbing recently came to my house to fix a leaking tap, and I couldn’t be more impressed with his service. He was incredibly efficient, getting the job done quickly without sacrificing quality. His effectiveness was evident as the leak was completely resolved, and I haven’t had any issues since. William was also very conscientious about cleanliness, ensuring the area was spotless before he left. Additionally, he was well-presented and professional throughout the visit. I highly recommend William and All Day Plumbing for their top-notch service.”
“Thank you all day plumbing for being so prompt. Called through due to my tap snapping and leaking and got a response straight away from Daniel. Thank you Joseph and William for your service. 2 hours later our tap is good as new. Will defs be returning.”
Leaking tap repairs
- Dripping taps, with new washers and re-seated tap sets.
- Mixer taps, with a new cartridge, or a new mixer if that doesn’t fix it.
- Broken spindles in shower and bath taps.
- Hose taps, replaced and secured to a peg.
- Taps that can’t be repaired, replaced. More on tap installation.
- Leaks you can’t see. See leak detection.
How a leaking tap repair works
Call 1300 301 354 or book online. Tell us which tap is leaking, and how.
We quote a fixed price, and work begins only when you say yes.
We isolate the water and replace the worn washer, cartridge or spindle.
We turn the water back on, test for leaks and clean up.
When a tap can’t be fixed
Most leaks come down to a worn part, but not always. In Oatlands in August 2026, a new cartridge didn’t fix a kitchen mixer, so we supplied and installed a new mixer, tested it and cleaned up.
Leaking hose taps
A peg is a timber stake that holds the tap and its copper pipe steady, so the pipe isn’t strained each time the tap is turned or a hose is pulled. At a North Rocks home in August 2026, there was no peg, so we fitted one when we replaced the leaking hose tap.
What does a leaking tap repair cost?
The price is fixed before any work starts. It depends on:
- The type of tap and the part that’s worn.
- How many taps need work.
- Whether a tap needs replacing instead.
Checking the job and pricing it is free on weekdays between 7am and 5pm, when there is no call-out fee. Book online and you’ll save $50, once you accept the quote.
Weekdays, 7am to 5pm*
Why All Day for leaking taps

The plumber at your door is licensed. We don’t send salespeople.
“I’m proud that we can look after our local community with fair, honest pricing. No commission-based plumbers, no huge ad costs to pass on, just local plumbers looking after local homes.”

All Day Plumbing & Maintenance Pty Ltd. Family-owned and run, more than 20 years’ experience, based on Powers Road in Seven Hills. NSW Contractor Licence 339748C. Fully insured.
Areas we cover
Our plumbers fix leaking taps all over metropolitan Sydney, working out of Seven Hills.
Hills District homes can read about our Hills District plumbers, and every other suburb is on the locations page.

Leaking tap questions
Why is my tap dripping?
What does re-seating a tap mean?
Can you fix a leaking mixer tap?
Can you fix a broken shower spindle?
What should I do if a tap won’t stop running?
How much does a leaking tap repair cost?
Book a tap repair.
Phone 1300 301 354 to book a fixed-price quote. Or book online and get the $50 online saving.
Prefer a callback?
Leave your name and number at the top of this page and we ring you back.
Request a callback* Conditions apply. After hours the call-out is $275 to $385 including GST, confirmed on the phone first. See our terms.