--:-- -- Sydney | Yes, we're open. A person answers 24/7
Request a callback

Pipe Relining Sydney

Restoring Your Pipes Without the Dig with All Day Plumbing. At All Day Plumbing, we specialise in pipe relining throughout Sydney. Our team of certified and experienced plumbers handles everything from cracked and root-invaded pipes to collapsed sections and leaking joints, providing innovative and professional service to repair your pipes from the inside out using durable resin lining, saving you the cost and disruption of traditional excavation while delivering a long-lasting solution for your plumbing system.

Upfront fixed quotes
$0 call-out weekdays, 7am to 5pm
Same-day service
Two plumbers setting up a pipe relining inversion drum beside an open sewer manhole under a gazebo

Pipe relining Sydney and the Hills District

Fix cracked, leaking and root-damaged pipes from the inside, without digging up your yard. CCTV first, upfront all-inclusive price before any work starts.

35-year material guarantee
50-year life expectancy

Book a relining inspection

We CCTV the line, show you what we find and give you an upfront price.

    SERVICE (select all that apply)

    Not a confirmed booking yet. We ring you back to confirm a time and the call-out terms. Urgent? Call 1300 301 354. * Offer conditions.

    No-dig pipe repair

    What is pipe relining?

    Pipe relining fixes cracked, leaking and root damaged pipes from the inside, without digging up your yard. All Day Plumbing provides pipe relining across Sydney, from our base in Seven Hills to Castle Hill, Baulkham Hills and the rest of the Hills District. We CCTV your pipes first, show you the problem, and give you an upfront, all-inclusive price before any work starts.

    Pipe relining puts a new pipe inside your old one. We clean the damaged pipe, then install a flexible liner soaked in resin. The liner is pressed against the old pipe wall and the resin cures hard. You end up with a smooth, sealed pipe with no joints for roots to get into.

    It works on sewer pipes, stormwater lines and other drains, from 40mm up to 600mm. It is also called drain relining, sewer pipe relining or trenchless pipe repair. For a longer explanation, read our guide on what pipe relining is.

    Inversion drum feeding a resin liner into an exposed sewer pipe in a backyard
    Inversion drum feeding a resin liner into a sewer pipe
    Is it your pipe?

    Signs your pipes may need relining

    • Drains that keep blocking, even after they have been cleared
    • Tree roots found in the sewer line
    • Gurgling toilets or slow drains across the house
    • Sewage smells in the yard or near an inspection opening
    • Wet patches or sinking ground over a pipe
    • Cracked or displaced joints showing up on a CCTV camera

    If your drain keeps blocking, the pipe itself is often the problem. A CCTV pipe inspection shows exactly what is going on before you spend money on a fix.

    CCTV camera view of tree roots growing into a sewer pipe before relining
    Before: tree roots in a sewer pipe
    CCTV camera view of a cracked clay sewer pipe before relining
    Before: cracked clay sewer pipe
    Relining or replacement?

    Pipe relining vs digging up the pipe

    Digging up the pipe

    Digging up a broken pipe means a trench through whatever is on top of it. That can be lawn, gardens, paving, a driveway or a slab. Then it all has to be put back.

    Relining the pipe

    Relining usually works through existing access points, such as an inspection opening or a manhole. Where there is no access, we open up one small section instead of the whole run. Less digging means less mess, less restoration and less time with your drains out of action.

    Relining is not right for every pipe. If a section has fully collapsed or lost its shape, digging and replacing that section can be the better fix. The CCTV inspection tells us which option suits your pipe, and we will tell you straight. Compare both options in our pipe relining vs replacement guide.

    How we do it

    Our pipe relining process

    Seven steps, checked on camera before and after.

    1

    CCTV inspection and locating

    We run a CCTV camera through the line to find the damage, measure the length and check the access points.

    2

    Upfront price

    You get an all-inclusive price for the job. The price is agreed before work starts.

    3

    Pipe preparation

    We clean the pipe with high pressure water jet blasting and specialised cutting heads. This removes roots, scale and debris so the liner can bond to the pipe wall.

    4

    HD CCTV check of the prep

    We run the camera again to make sure the preparation is complete before any liner goes in.

    5

    Liner installation

    The liner is impregnated with a 2 part epoxy resin and installed by our own trained team, as specified by the Brawoliner manufacturer. Where a branch line joins the main line, we can seal the junction with a satellite patch.

    6

    Curing and quality control

    We allow the resin to cure fully. Then we run HD CCTV through the new liner for quality control.

    7

    Test, commission and clean up

    We test and commission the work, and clean up the site before we leave.

    CCTV view of a smooth, seamless liner inside a sewer pipe after relining
    After: smooth, seamless liner
    CCTV view of a relined pipe at a junction after relining
    After: relined pipe at a junction
    Recent work

    Recent pipe relining jobs

    Castle Hill · Sewer

    Sewer relining in Castle Hill, no digging

    This sewer line ran from an inspection opening to a shaft, then on to the mains connection. Here is what we did:

    • Prepared the full line with high pressure water jet blasting and specialised cutting heads
    • Checked the prep with HD CCTV
    • Relined 15 metres of 4 inch (100mm) pipe from the inspection opening to the shaft, using a liner impregnated with 2 part epoxy resin
    • Relined a further 4 metres of 4 inch pipe from the shaft to the mains connection, using the same method
    • Installed by our trained staff as specified by the Brawoliner manufacturer
    • Ran HD CCTV again for quality control, then tested, commissioned and cleaned up

    The reline works on this job carry a 35 year material guarantee, with a 50 year life expectancy.

    Baulkham Hills · Commercial

    Sewer relining and junction repair at a commercial site in Baulkham Hills

    This job had a damaged sewer line and a junction under a busy area. There was no easy access, so we planned two small access points instead of lifting the whole floor.

    • Fenced off and secured the work area
    • Cut a section of concrete about 1 m by 1 m
    • Excavated to expose the sewer line, about 600mm deep
    • Cut out a 1 m section of pipe to give access for the inversion reline
    • Isolated the water and removed a toilet for the second access point
    • Installed about 3 m of inversion reline and 1 satellite patch to seal the junction
    • Let the resin cure, then confirmed the result with CCTV
    • Reinstated the pipework and raised an inspection opening outside for future maintenance
    • Backfilled with blue metal for support, reinstated the bitumen and refitted the toilet
    • Tested, commissioned and cleaned up

    The new inspection opening means future downstream access can happen outside, without lifting the toilet again.

    Stormwater · 300mm

    Stormwater relining, 300mm line

    We also reline larger stormwater lines. The CCTV shots below show a 300mm stormwater line before and after relining.

    CCTV view of a 300mm stormwater line with debris and worn walls before relining
    Before
    CCTV view of the same 300mm stormwater line with a new liner after relining
    After
    Pricing

    What affects the cost of pipe relining?

    Every relining job is priced after a CCTV inspection, because no two pipes are the same. The main things that affect the price are:

    • Length. How many metres need relining.
    • Pipe size. We reline pipes from 40mm up to 600mm. Larger diameters use more liner and resin.
    • Junctions or patches. Each branch connection may need its own patch, and patches vary from job to job.
    • Access. Whether there is an inspection opening or we need to open up a small section.
    • Prep work. Heavy roots or scale take longer to clear.
    • Reinstatement. Any concrete, bitumen or fittings that need putting back.
    From $450

    per metre. The final price depends on length, pipe size, junctions or patches, and access. We quote it upfront and all-inclusive after a CCTV inspection, and the price is agreed before work starts. For more detail, see our guide to pipe relining cost.

    Our guarantee

    Our relining guarantee

    Our reline works come with a 35 year material guarantee and a 50 year life expectancy. All relining is done by our own team, and every job is checked with HD CCTV before and after, so you can see the result for yourself. Read more about how long pipe relining lasts.

    35 yrMaterial guarantee
    50 yrLife expectancy
    HD CCTVBefore and after every job
    Our teamNo subcontractors on the liner
    Daniel Khamis, Director of All Day Plumbing
    Who you are dealing with

    The plumber at your door is licensed. We don’t send salespeople.

    “I’m proud that we can look after our local community with fair, honest pricing. No commission-based plumbers, no huge ad costs to pass on, just local plumbers looking after local homes.”

    Daniel KhamisDirector, All Day Plumbing

    All Day Plumbing & Maintenance Pty Ltd. Family-owned and run, more than 20 years’ experience, based on Powers Road in Seven Hills. NSW Contractor Licence 339748C. Fully insured.

    Where we work

    Pipe relining across Sydney and the Hills District

    We are based in Seven Hills. We work right across the Hills District and suburbs across Sydney, for homes, strata buildings and commercial sites.

    See our Hills District plumbing page or our strata plumbing services.

    Questions people ask us

    Pipe relining FAQs

    Is pipe relining worth it?
    Often, yes. Relining fixes cracks, leaks and root entry without digging up gardens, driveways or slabs. Our reline works carry a 35 year material guarantee and a 50 year life expectancy. A CCTV inspection shows if your pipe is suitable.
    How much does pipe relining cost?
    Pipe relining starts from $450 per metre. The final price depends on length, pipe size, junctions or patches, and access. We CCTV the line first, then give you an upfront, all-inclusive price that is agreed before work starts.
    How does pipe relining work?
    We clean the pipe with a high pressure water jet, check it with CCTV, then install a liner soaked in 2 part epoxy resin. The resin cures hard and forms a new pipe inside the old one. We CCTV it again to check the result.
    How long does pipe relining last?
    Our reline works have a 50 year life expectancy and a 35 year material guarantee.
    How long does pipe relining take?
    It depends on the length of pipe, the number of junctions, how much prep is needed and the resin curing time. We give you a time estimate with your quote.
    Can old clay sewer pipes be relined?
    Usually, yes. Cracked clay pipes and pipes with root intrusion are common candidates for relining. If a section has fully collapsed, that part may need digging up instead. CCTV tells us which.
    Do you need to dig to reline a pipe?
    Usually not much. We work through existing inspection openings or manholes where we can. If there is no access, we open up one small section instead of digging the whole line.
    Drain keeps blocking?

    Book a pipe relining inspection.

    Got a drain that keeps blocking, or roots in your sewer? Call 1300 301 354. We will CCTV the line, show you what we find, and give you an upfront price before any work starts.

    Prefer a callback?

    Leave your name and number at the top of this page and we ring you back to book the CCTV inspection.

    Request a callback

    * Conditions apply. After hours the call-out is $275 to $385 including GST, confirmed on the phone first. See our terms.