Open Now 01:59:25 PM

Mon to Sun 24/7

5 Star Service

Locations we service

What Is Green Plumbing?


Like most other systems, plumbing plays a crucial role in every household. And good plumbing helps keep your home clean and hygienic.

What if we said that plumbing could make your home environment-friendly as well? You may find it a bit difficult to believe, but trust us, it is possible, all thanks to green plumbing!

With every passing day, more and more people are becoming environmentally conscious, due to which they are opting for more eco-friendly means of living. And green plumbing is one of these systems that have emerged in recent times to deal with the plumbing infrastructure of your home.

But what exactly is it, and how is it different from conventional plumbing? That is what we have addressed in this brief informative guide.

So, without wasting any more time, let’s dive right in!


What Is Green Plumbing?


Similar to most other eco-friendly, “green” systems, the basic principle behind green plumbing is simple – to make the plumbing infrastructure more ecologically sustainable than before. Therefore, it essentially refers to the methods of plumbing that aim to reduce the environmental impact and wastefulness of conventional plumbing systems.

Water is a precious commodity that is utilised everywhere, and that is why you should use it judiciously whenever possible. In this regard, many conventional plumbing systems have been observed to be grossly inefficient and wasteful when it comes to conserving water. Many traditional plumbing systems utilise more water than necessary for everyday activities.

So, to combat this inefficiency, more and more people are switching to these ecological plumbing systems in their properties and households. This, in turn, helps them minimise water usage as much as possible. 

In addition, many regulatory bodies have mandated the use of green plumbing systems. This has been done to increase sustainability and minimise the load on the water supply and sanitation systems. Thus, by adopting this plumbing method, households can comply with these regulations.

There are several methods and techniques of green plumbing that are used today. These include the installation of solar water heating systems, rainwater storage tanks, water-saving fixtures and fittings, water recycling systems, and so on.


The Advantages Of Green Plumbing Systems


If you implement green plumbing within your household, you get several advantages. Some of these advantages have been listed below.


1. More Eco-Friendly

Without a doubt, the biggest and most obvious advantage of green plumbing is its sustainability. Thanks to water-efficient taps and fixtures, you can significantly reduce the amount of water that is wasted. 

These fixtures and fittings come with features such as auto shut-off, low-flow mechanisms, low-capacity flushes and so on. Consequently, they utilise only the necessary amount of water to get the job done without wastage.


2. Save Money

Thanks to green plumbing systems, you can save a lot of money on monthly water bills. Methods like rainwater harvesting, allow you to capture water from natural sources (such as rain). 

On top of that, installing water recycling systems will allow you to reuse the water in your tank after proper treatment. So, you do not need to pay more for extra water, thereby minimising your water bills.

Additionally, using solar water heating systems helps save money on your electricity bills. Since you can heat the water using solar energy instead of conventional electricity, your electricity consumption also decreases. 


3. Ease Of Use

Unlike conventional plumbing systems, green plumbing is relatively easier to use. For instance, water-efficient, low-flow faucets and taps come with auto shut-off features. So, you don’t need to manually turn on the water when you want to use it.

Besides, you do not need to remember about pumping water to fill up the rainwater harvesting water tanks. They will automatically get filled when it rains, which makes them relatively convenient to use.


4. Increase The Lifespan Of Your Plumbing Fixtures

One indirect benefit of using green plumbing systems is an increase in the lifespan of your plumbing fixtures and appliances. In conventional plumbing, the water pipes and fixtures may get worn out quicker since they use relatively more water. 

On the other hand, green plumbing fixtures use lesser water and have a reduced flow, which minimises the wear on these fixtures. As a result, you can use them for longer, and they will also require fewer repairs and replacements than traditional fixtures.


Disadvantages Of Green Plumbing Systems


While it obviously has a lot of advantages, there are a couple of disadvantages to green plumbing, as described below.


1. Initially Expensive

Green plumbing techniques and systems will eventually help you save a lot of money, but the initial investments required can be somewhat high. You will need to spend quite a lot to install solar water heaters, low-flow toilet fixtures, or rainwater tanks. That may reduce the short-term feasibility of such a system.


2. Challenging To Install

The installation of these plumbing systems can be pretty challenging, especially compared to traditional plumbing. Proper plumbing expertise is necessary to install water recycling systems or rainwater tanks. Otherwise, they will not be seamlessly integrated throughout the water supply system in your household.


Final Words


The benefits of a green plumbing system far outweigh any disadvantages that it may have. Besides, if you can get in touch with a plumbing company that can provide effective plumbing services, most of the benefits can be mitigated anyway. 

They will help you switch to this greener plumbing alternative effectively and affordably. And if you are wondering how many plumbing systems you should install, there is no set limit, but the more, the better. You can start with simple ones, such as low-flow bathroom fixtures, and eventually expand from there until your whole household is ecologically sustainable.

Now that we have arrived at the end of this informative guide, we sure hope that you found it interesting to read.

That’s all for now. Till next time, take care!

How Does A Grease Trap Work?


In case you didn’t know, oils, fats and grease are bad news for your drainage system.

The issues that arise from their deposition may well cost you hundreds of dollars to fix. Moreover, they can clog the entire drainage system of your neighbourhood and create problems in water treatment facilities. 

Just like you need to avoid blockage in your arteries to stay healthy, it’s important to care for the drainage system. And this is where grease traps come in! They prevent fats, oil or grease from passing the pies to ensure unobstructed water flow. 

Wondering how it actually works? Then we have got your back as we have explained the overall operational process of grease traps in the following sections, so continue reading!


What Is A Grease Trap?


Grease traps have been around for centuries and are alternatively known as grease converters, interceptors, recovery devices, or catchers. They are used in different setups, including: 

  • Cafes
  • Restaurants 
  • Takeaways 
  • Hotels 
  • Pubs, inns, and bars
  • Bakeries
  • Colleges and schools

In simple words, a grease trap is a repository into which fats, oils and grease (FOG) flow before entering the drainage system. The receptacle traps the FOG and lets the clear water to pass through. 


How Does It Work?


The basic principle on which grease trap works is that vegetable oils (grease) and animal fats are less dense than clear water and thus do not mix. Hence, the oils and fats float on top of the water. 

When wastewater flows through this trap, the flow rate is reduced to allow it to separate into three distinct layers. The grease and oil, which have the highest densities, float on the top and are trapped by a baffle system. On the other hand, fats and other solids have low density, making them settle at the bottom and allowing clear water to escape from under the outlet baffle. 

You’ll also find strainers in many grease traps that accumulate solid debris and reduce the amount of solid deposits at the bottom of the time. However, the grease and solids that continue to deposit might start escaping through the outlet and cause a blockage. Therefore, it’s essential to clean the trap periodically. 

Now, the time between cleaning or pumping out the trap depends on the amount of wastewater generated and the size of the trap. However, it usually needs cleaning every 2-4 weeks on average. 

You can also extend the cleaning time by adding a biological grease treatment fluid into the system. It is formed by a combination of bacteria, enzymes and nutrients to break down FOG, ultimately enhancing the performance of the grease trap. 


Different Types Of Grease Traps 


Depending on how they work, grease traps are mainly of three types: automatic, passive hydromechanical and gravity. 


A. Passive Hydromechanical 

These grease traps are generally used in small establishments like cafes, takeouts etc., mainly due to their low upfront costs and variation in sizes. This means they can be installed in most sinks, and the larger ones are especially suitable for sinks that produce large quantities of wastewater. 

The first passive hydromechanical grease traps were manufactured in 1885, and even current models are based on the elementary design. They are generally made of stainless steel or plastic and require manual clean up regularly.


B. Automatic

Automatic grease traps function in the same way as traditional passive traps, but they heat and skim FOG on a predetermined schedule. The FOG that has been skimmed is transferred to a collector bin for safe disposal. 

Automatic grease traps work according to the amount of FOGs produced on a periodical basis, so owners don’t have to worry about measuring the grease level. 

Similar to passive traps, they are available in various sizes to fit in different sink sizes. Although the upfront cost is on the higher side for them, they are more efficient and require less servicing and low long-term running costs. 


C. Gravity Grease Traps

These grease traps are generally large in-ground tanks made of fibreglass, concrete or steel. Their operating principle is similar to that of passive hydrochemical models but they come with larger capacities to handle more amounts of wastewater. It’s essential to pump gravity traps on a periodical basis, which is best done by professionals. 


Who Needs Grease Traps?


In Australia, there are regulations and legislations outlining the best practices for the proper disposal of oils, fats, grease and starches. 

For example, the Building Regulations mandate that commercial kitchens serving hot foods, which have their drainage system connected to the main drainage line of the area must install a grease trap. Restaurant owners can face numerous challenges when it comes to maintaining high-quality service and keeping the setup optimally hygienic. 

But cleaning and washing crockeries, equipment and kitchen utensils can cause the residual FOGs to run down the drains, thereby forming unpleasant odours and pipe blockages. So, if you’re a commercial kitchen owner, it’s essential to choose the right grease traps, which best suit your requirements.

Having a perfect grease management system allows you to comply with existing standards and is vital for maintaining smooth and effective kitchen operations. 


Final Words


We hope to have helped you understand how these grease traps work and what should be done to keep them in good condition. But it’s better to take help from a professional plumber when installing these. 

A professional will also help figure out the right sized grease traps according to your plumbing setup, as this can be a challenging affair if you don’t know much about sinks and drains. Apart from properly installing the interceptor, they will keep you informed about how often to clean the trap regularly and conduct regular maintenance to keep it optimally functional. 

With this, it’s a wrap for today. We will see you again. Goodbye and take care!

How Do Professional Plumbers Fix Clogged Drains

How Do Professional Plumbers Fix Clogged Drains

We’ve all experienced the dismay that comes with discovering clogged drains in the kitchen or bathroom.

And while there are several DIY methods that you can use to deal with this problem, they often do not work. In such cases, the only recourse is to call professionals who can resolve the problem efficiently and quickly. However, professional assistance does involve higher costs and, depending upon the nature and scale of the problem, it can be quite costly. 

While most DIY methods use items that are easily available at home, professionals utilise powerful tools and machines suitable for more complicated problems. And it can be quite beneficial to know about the techniques that professional plumbers use to unclog blocked drains.

That’s where we come into the picture by walking you through the common techniques used by professional plumbers for unclogging drains. So, let’s get started!


How Professionals Fix Clogged Drains


In most cases where DIY drain cleaning methods do not work, the reason is that the sewer lines and drains become clogged with a wide variety of materials over time. These include soap scum, grease, body fluids, cooking grease and others. Many of these materials cannot be cleared using baking soda and vinegar, which are commonly used in DIY methods. 

Apart from that, denser clogs require more force to clear and allow the passage of water through the drain. And professionals have a range of powerful tools that utilize the latest technologies and get the job done most efficiently. Such tools, like hydro-jetting machines, blow-torches, pipe-wrenches, etc., are not available for home use and, in many cases, require training to be used. 


Professional Plumbing Tools


1. Manual Drain Snakes

Also called a drain auger or a plumber’s snake, a manual drain snake is a tool used for boring and is pushed through denser clogs that are difficult to remove. It has a corkscrew-shaped hook at its end, which is fed into the drain and rotates when the plumber turns the handle of the snake drum.

Drain augers are most useful in dealing with simpler toilet or drain clogs or removing debris and waste from the sewer system. This is generally the tool that plumbers use for clearing clogs close to the drain surface rather than those that are much further inside. 


2. Motorised Drain Snake

If the blockage or clog is located at a depth of ten feet or is too dense to remove manually, a manual drain snake cannot be used. For such problems, plumbers utilize a motorized drain snake that can reach up to 150 feet down a sewer line or drain and is powered by an electric motor. This motor provides additional power for rotating the tool. 

Powered drain snakes are best for removing blockages caused by invading tree roots but can also be used for clogged sewage, food waste and grease. But using a motorized drain snake comes with certain risks and can even worsen a plumbing situation in certain cases. For instance, if the plumbing is old and has corroded pipes, this tool can damage the line. 


3. High-Definition Drain And Sewer Line Cameras

In case of total blockage of the sewer line or drain, even using a motorised drain snake might not result in any success. Then the plumber might have to depend on a high-definition snake camera. This camera allows the plumber to get a proper look at the interior of the plumbing and see what the cause of the blockage is.

Once the plumber understands the cause and location of the clogging, he can then select the most appropriate tools and methods to deal with the issue. 


4. Hydro-Jetting Machine

A hydro-jetting machine is among the most powerful tools in a plumber’s arsenal. It uses concentrated water jets that can effectively flush away all sorts of debris accumulated, such as grease, soap scum and other waste. Hydro-jetting machines can release water at a pressure of 35,000 PSI, which can practically eliminate any residue or clog from the drains. 


What Causes Drain Clogs?


The first step to resolving problems such as a drain clog is understanding what causes it. Drains or pipes can get clogged by almost anything that lands up there, including food waste, toilet paper, grease and oils, soap scum and other materials. And problems such as a clogged drain can often lead to more serious issues such as a toilet backing up into your bathtub. 

As mentioned above, DIY methods can help deal with blockages that are not very dense and relatively easy to clean. But you should avoid using chemical drain cleaners, which are hazardous to health and can adversely affect the plumbing and the environment. Instead of using chemical cleaners, use enzyme-based drain cleaners that can eliminate organic materials in the clog and prevent such problems from occurring again. 


Who To Call For Dealing With A Clogged Drain Or Sewer Line?


When all your DIY methods have failed to clear your clogged drains or sewer lines, it is time to call a professional plumber. And the Sydney area has some excellent plumbing companies, such as All Day Plumbing, which has a team of licensed and experienced plumbers familiar with all types of plumbing issues. They are also equipped with the latest tools and trained in various methods of dealing with a wide range of plumbing problems. 


Final Thoughts


There are several reasons why calling a professional plumber may be the only way of getting your clogged drains unblocked. Besides the training and the tools, there are certain safety precautions that you may not be aware of, which can put at risk the entire plumbing. 

Plumbing professionals are well-versed with such precautions and ensure maximum safety while working. That’s why using DIY methods is suitable for partial, non-serious clogs but not for more complicated ones.

On that note, we shall be wrapping things up. Until next time! 

All Day Plumbing | Dishwasher Plumbing

What Plumbing Is Needed For A Dishwasher?


Did you know that the cost of installing your new dishwasher isn’t always included in its final price?

If you have ever bought an appliance from an online or offline home-improvement store, you’d know that installing it often requires DIY skills. And dishwashers, which are among the most useful household appliances, aren’t an exception.

So, here we are to help you figure out the dishwasher plumbing in the absence of a professional service.


What Do You Need To Connect A Dishwasher?


Before you can start connecting your new dishwasher to the existing plumbing, there are a few things to take care of.

First and foremost, you should ensure a compatible power connection for the unit to run smoothly. Now, most dishwashers employ either an NM circuit cable, which directly runs into the wire connection box on the unit. These are referred to as “hard-wired” dishwashers. Or, they may use a basic cord that fits into any wall outlet. 

However, keep in mind that the Building Code of Australia states that water pipes and power points can’t be installed in the same under-sink cabinet as the dishwasher. 

This means that the drainage pipe, power outlet and water lines should ideally be installed in an adjacent cabinet. And the required hoses and pipes are connected to the unit through an opening between the two cabinets. Hence, make sure you make the necessary arrangements before starting with the installation.

Next comes the water supply connection, which is a relatively easy process. All you have to do is connect the water inlet valve (located on the dishwasher) to one end of a braided steel tube supply line. For this purpose, you will need a dishwasher 90-a dedicated brass attachment. And the other end of this line should be connected to the shutoff valve of a hot water supply line.

The good news is that most dishwasher installation kits come with both the attachment and the supply connection line, so you don’t have to buy them separately. 

Last but not least, connect the drain hose to the drain trap located under the sink according to the plumbing codes of your area. A successfully installed drain hose will keep the dirty wastewater from re-entering the dishwasher, which is why it’s either attached to the sink outlet or garbage disposal.


Tools Required For Installing The Dishwasher


  • Dishwasher installation kit
  • Connection cord
  • Wire nuts or connectors
  • Pipe joint fixture
  • Screwdriver
  • Pliers or wrenches
  • Drill and bit set


Step 1: Connect The Appliance Cord

Although the exact location of the plumbing and electrical connections will depend on the model you choose, these are generally placed behind an access panel. And this panel is placed on the front bottom side of the unit. Hence, it may be a good idea to make these connections while keeping the dishwasher lying flat on its back on the floor.

Once you remove this panel using the screwdriver, you will have access to the electrical housing. Now, carefully insert the provided power cord through this housing so that the green wire connects to the green grounding screw. Likewise, the black wire should connect to the black tip and the white one should connect to the white tip.

Use the wire connectors and nuts to secure these connections and replace the housing.


Step 2: Connect The Water Supply Line

Start by installing the dishwasher 90 attachment on the water inlet (solenoid valve). For this, apply some pipe joint compound to the threads on the attachment, place it on the inlet and tighten its position by twisting it. You may even use the pliers or wrench to ensure that it’s fully fitted.

Then, take the water supply tube and attach its coupling nut to the attachment using the pliers. However, be careful not to apply too much pressure, as this may damage the threads of the coupling nut and, in turn, the connection.


Step 3: Place The Dishwasher

Straighten the dishwasher so that its front side is facing you and push it inside the under-sink cabinet. Use the opening on the sidewall of the cabinet to position the plumbing and electrical connections in the next cabinet. 

If the dishwasher comes with an adjustable base or feet, you can decide its height according to your convenience. 


Step 4: Fasten It To The Cabinet Frame

Once you have decided on the position and height of the dishwasher, open its door to get to the mounting brackets. The installation kit should also come with screws that will help you fasten it to the frame of the cabinet.


Step 5: Connect The Other End Of The Water Supply Tube

As the next step, connect the free end of the water supply tube to the shutoff valve under the sink and turn it on to check for potential leaks. Simultaneously, check the other end of the connection (attached to the dishwasher) to ensure that there are no leaks.

If you notice any, use the pliers or the wrench to tighten the joints, but don’t turn them aggressively. Otherwise, you may break the fittings.


Step 6: Attach The Drain Hose

The penultimate step in the process involves attaching the drain hose to the dishwasher by following the plumbing regulations in your area. 

For instance, some regions may require you to attach the drain hose to the air gap fitting on the countertop, while others may mandate looping it up and securing it under the sink. Finally, plug in the unit and test it by running a full cycle to ensure that the water inlet and outlet are functioning properly.


Final Words

Your dishwasher is now ready to use!

Truth be told, dishwasher plumbing can be both challenging and tiresome, especially if you aren’t familiar with DIY plumbing tasks. In that case, we’d suggest calling trained and licensed professionals. Not only will they ensure the safe installation of your dishwasher, but they will also comply with the complicated plumbing codes in the best possible manner.

See you next time!

Professional Plumbers Using A Hydro Jetting Machine

When Do Professional Plumbers Use A Hydro Jetting Machine


Let’s face it – plumbing issues are everyone’s worst nightmare.

Whether it’s at your home or place of work, even a minor issue with the plumbing system can bring life to a complete standstill. And we won’t be wrong to say that clogged sewer pipes are the worst of the lot!

Although you may think snaking or chemical drain cleaners will come to your rescue, this may not always be the case. That’s where a hydro jetting machine comes into the picture. Read on to know more about when you should use one to ease your plumbing troubles.


What Is Hydro Jetting Afterall?


For the unversed, hydro jetting is a fairly new plumbing technique used by professional plumbers to eliminate stubborn, slow-moving clogs from sewer pipes. This high-pressure “jetting” method can effectively break down any clog, be it from organic scraps or other solid waste like papers, tissues, diapers, etc.

When employed correctly, hydro jetting can be extremely beneficial in preventing future clogs or reducing the frequency of clogs in heavy-duty sewage lines. It basically employs a hydro jetting machine (also called hydro jetter or jetter), which is attached to a high-capacity water tank and a hose. The hose culminates into a nozzle, which comes in different shapes and sizes. And the plumber will choose between them depending on the cleaning requirements.

The process starts with inserting the nozzle into the sewer pipe through the opening and engaging the tank to fire a high-pressure water stream. In hindsight, the water tank stores water at high pressure (measured in PSI- pounds per square inch), which results in a high-speed stream that can break the clog or debris buildup. This step can be repeated until the clog is completely removed and flushed down the pipe.

Generally, a professional plumber will use a hydro jet to clean a sewer pipe in one or more of the following situations:

  • Tree roots or ice buildup obstructing the pipes
  • Stubborn deposits of sand, silt or calcified scale 
  • Neutralising oil and grease accumulation
  • Flushing a stagnant sewer system
  • ‘Scrubbing’ the interior walls of the sewer pipes


When Does A Professional Plumber Employ A Hydro Jetting Machine?


Well, cleaning clogged sewer pipes or drains in modern residential settings isn’t the only time when the true potential of a hydro jetting machine is realized. It may very well be used for maintaining the sewage system of:


1. Old Structures

The sewer pipes below old or heritage buildings may have years of sludge, oil and waste accumulation in their sewer pipes. Although you may use a drain snake to break some of it, the deposition on the walls or near the joints can be practically impossible to eliminate without hydro jetting.

Moreover, snaking the drains frequently can be a cumbersome and expensive means of treating clogged pipes. Instead, employing this technique can be time-saving and economical in the long run, as it can also prevent future clogs.


2. Commercial Kitchens

Most commercial kitchen sinks in restaurants, hotels and other similar establishments have strainers to catch the larger particles of food waste. However, it’s no surprise they send a lot of oil, fat and grease down the drain, which ultimately find their way to the sewer pipes. And snaking alone can’t break this thick buildup.

Such clogged sewer pipes can cause water to backflow into the sinks, causing disruption to business operations and posing massive threats to the hygiene of these kitchens. That’s why commercial spaces opt for hydro jetting as a part of the regular plumbing maintenance to keep the pipes optimally functional.


3. Municipal Sewers

Municipal sewage systems comprise big pipes with large diameters, where snaking or other clog breakdown mechanisms yield little to no results. However, the high-pressure water stream from a hydro jet machine can break down intense clogs within a short span to make the pipes work as good as new.


What Are The Benefits Of Hydro Jetting?


The primary advantages of hydro jetting include:


1. Quick Breakdown Of Clogs

Thanks to the high-pressure water jet, you can rest assured that even the toughest clogs will break down within a short span. Hence, you don’t have to wait for hours for the pipes to clear out, unlike other traditional pipe cleaning methods.

Moreover, tools like drain snakes can only reach the centre of the clog, as they aren’t designed to scour the wall linings. If you’re not using hydro jetting, you’re essentially spending more time and money on separate pipe cleaning techniques to ensure that the clog is broken down fully and flushed away properly.


2. Eco-Friendly And Safe

Hydro jetting is one of the most eco-friendly pipe cleaning methods as it uses only plain water free from harmful toxins or chemicals. Not only does this make it suitable for almost all types of pipes, but it also negates the risk of health concerns in case of any leaks from the tank or during the procedure. 

So, if you want to use this method for cleaning the sewage pipes at home or office, you don’t have to worry about putting peoples’ lives at risk. That said, we’d still suggest vacating the area and covering all other surfaces in the vicinity to avoid moisture-related damage.


Are There Any Disadvantages?


Perhaps, the only cons associated with this method is that it isn’t ideal for older pipes, as the high-pressure water jet can easily damage them. The pipes may also break completely, causing a flood of waste. And this can, in turn, become a health hazard for people in the vicinity.


Final Words


If you’re tempted to try hydro jetting to clean your sewer pipes, then get in touch with a local plumbing service that provides a jet on rent. This way, you can perform the job on your own and avoid paying for professionals.

However, if you aren’t confident about your DIY skills or aren’t familiar with such heavy-duty equipment, we’d strongly suggest taking professional help. Although you may have to extend your budget, you won’t risk inflicting any unnecessary damage on the surfaces in the vicinity.

With that, we will wrap up today’s proceedings. See you again, mate! 

Instantaneous Hot Water System And Hot Water Storage

Instantaneous Hot Water System And Hot Water Storage

Having continuous access to hot water is essential for all households to keep up with various chores. 

Most houses are likely to come with a preinstalled hot water system. But, while revamping a house or building a space from scratch, the decision of picking a suitable hot water system lies with you. 

A traditional option to go with would be a gas-powered storage-based hot water system with enough capacity to sustain the needs of all family members. However, the market has evolved, and we now have something known as the instantaneous or continuous system that never lets you run out of hot water. 

The various aspects of picking a hot water system can quickly get confusing, particularly for a first-time homeowner. So, we created this guide to lay down the key differences between instantaneous and storage hot water systems to make the process easier. 


Key Differences Between Instantaneous And Storage Hot Water Systems 


1. Working Mechanism 

Before moving forward, it’s important to know the basic mechanisms of both hot water systems. Most people are already well-acquainted with the traditional storage variant, where the hot water is stored in a tank. The heating in a storage system can be through solar, electric, or gas, depending on the availability of energy sources. 

Typically, the tank of a residential hot water system has a capacity between 135 to 170 litres. And the size of a storage tank is based on the number of members present in a family. Rather than just providing heating usage, the system needs to reheat the water as it loses heat over time. 

On the other hand, an instantaneous water heater system doesn’t use a tank and instead focuses on providing hot water continuously. That’s why picking this system often rests on the desired flow rate for a household. This system can also be powered by either gas or electricity. 

Its mechanism is pretty simple; the heating element starts working when a tap is turned open to provide a steady flow of hot water. Moreover, there is an electronic control unit to maintain the water temperature to prevent it from getting too hot. 

Both systems are available in single point and whole-house or multi-point units to provide an adequate hot water supply for the whole household. However, while choosing an instantaneous system, you should ensure that the flow rate isn’t drastically compromised when multiple taps are left open. 


2. Energy Consumption 

When it comes to energy consumption, the instantaneous hot water system works better as the heating element is only required to work while the tap is turned on. In the case of storage systems, more energy is required to maintain the temperature of the water in the tank. 

On that note, instant systems often receive some of the highest energy ratings of 6 or 7 stars, hinting at their ability to run without wasting energy. On the other hand, most storage systems receive a 4 or 5-star rating, which is adequate but not optimal as energy is utilised to keep the water hot. 

Needless to say, instantaneous gas hot water systems are thought to be an excellent option for any household due to their high energy efficiency. They are also known to emit up to 75% less CO2 than storage-based units, making them a more eco-friendly option.


3. Size And Aesthetics

As you might have already guessed, instantaneous hot water systems take less space than traditional storage hot water systems. For the latter variant, you’ll need to make enough space in your house to fit the massive tank that carries up to 170 litres of water. 

The total instant system is often enclosed in a wall-mounted box that won’t look out of place in your home or use too much space. Furthermore, due to the reduced size and space-saving feature, instantaneous hot water systems are preferred for small houses and apartments. 


4. Lifespan 

One of the reasons people still gravitate towards the traditional storage hot water system is its long lifespan. The average is taken to be around 10-15 years, and most come with a warranty of 5-10 years. But, there’s no need to worry as instantaneous systems have matched it up, and the latest models can last up to 20 years. 

You should note that the lifespan of a hot water system can vary based on factors like maintenance, the extent of use, and the quality of water. Moreover, both storage and instant variants require occasional cleaning and upkeep to ensure a long lifespan.


5. Health And Safety 

A common concern with storage hot water systems is the growth of bacteria in the tanks. When cleaning isn’t done regularly, this can escalate into a problem in which your health is compromised. Moreover, the World Health Organisation recommends maintaining a temperature of 60°C to prevent bacteria growth, especially Legionella pneumophila. 

And since they do not require storage tanks, many people opt for instantaneous gas hot water systems to be on the safer side. Also, such units make it easier to set a comfortable temperature to avoid accidental scalding. 


6. Price 

When comparing the price, the upfront cost of installing an instant hot water system is more than getting one with a storage tank. But, the price may also depend on how advanced the system is, along with the desired flow rate and points of connection. You should also note that systems with a higher energy efficiency rating often cost more than those with fewer stars. 


Final Words 

That’s everything we had to tell you about the differences between instantaneous and storage hot water systems. We hope that this guide will help you choose a system that works best for your home. 

If in doubt, don’t forget to take help from professional plumbers as they can provide the best advice when choosing a suitable system based on your needs. You can also consult them to improve the efficiency of an existing hot water system. 

Moreover, when comparing the prices, don’t forget to consider the factor of recurrent energy and maintenance costs. Until next time!

How Do You Keep Water Fresh In A Rainwater Tank?

How Do You Keep Water Fresh In A Rainwater Tank

There’s no denying that rainwater can be highly useful for a variety of household purposes. 

And with growing concerns about water scarcity across the world, it has emerged as one of the best alternatives to regular water. It’s not surprising that most Australian homeowners nowadays have their personal rainwater collection system. 

But the task of conserving rainwater doesn’t end with an effective collection. You also need to ensure the water is fresh enough to use for watering plants and other daily household chores. 

That’s why it’s important to know how to keep water fresh in a rainwater tank in Sydney. We’re here to help you with all the essential details regarding the same, so let’s get started! 


How Do You Keep Water Fresh In A Rainwater Tank? 

Here are five simple tricks to adopt for keeping the rainwater in your tank fresh. 


1. Empty The Barrels Weekly

Standing water can quickly become a breeding ground for bacteria, mosquitoes, and other undesirable organisms. So, in case you’re collecting rainwater in barrels, make sure you empty them frequently. 

Note that you should change the water on a weekly basis to allow fresh water to collect in the barrels. That way, all undesirable organisms in the tank can be washed out. 

At this point, here’s a tip to eliminate microbial growth and destroy potential viruses that might’ve entered your tank. Use bleach to kill microbes completely, and after you’ve scrubbed out the barrels using chemicals, rinse them multiple times to remove all chemical traces. 

Note that the newly collected water in an unclean tank might contain residual chemicals that can damage your plants. But in colder temperatures or during the winter months, you don’t need to empty these barrels as frequently. You can store water for two to three weeks when the temperatures are very low and unfit for organisms to thrive in. 


2. Install Filters

Filters are crucial for any rainwater tank in Sydney and are suitable for installation at different points in the rainwater collection system. When you’re using gutters to filter water down the roof and into a barrel, you should install the filter at the primary pipe runoff point for collection. 

This will keep the larger particles from entering the tank or barrel, preventing contamination. You can also put a filter at the spot where the water is about to enter the tank. Such a filter should have a finer mesh that can decrease the chances of undesirable particles entering the water tank. 

Also, ensure that you monitor and clean the filters regularly to prevent blockages and waste buildup. 


3. Add Iodine/ Chlorine Tablets

In case you’re growing edibles in the garden, we’d strongly recommend treating the rainwater for waterborne diseases. Notably, giardia and crypto are the two primary diseases that you might suffer from, affecting your bowels. 

They can arise not only due to contaminated water intake but also from the consumption of edibles that have been grown with impure water. If you wash the edibles, it can help prevent such diseases, but the most effective technique in this regard is to treat the water before use. 

You can add iodine and chlorine tablets into the tanks as they will prevent algae growth and eliminate the chances of giardia and crypto. Ultimately, your water will be safe for use and capable of being stored adequately.


4. Use Paint Barrels

Another highly effective and interesting way to stop algae from thriving in a rainwater tank in Sydney is to stop the entry of light. Using brown or black paint to colour the barrels can help reduce the amount of light entering the tank. 

Since algae require light to thrive, using a tank that has dark sides and a lid can help prevent their growth without the need for chemical treatment or frequent cleaning. 

At the same time, it’s worth noting that the dark colour of the barrels can heat up the tank more as they’ll absorb more sunlight. The increased temperature might again create a conducive environment for parasites like mosquitoes. Alternatively, you can consider adding oil to the water surface to prevent their growth which we will discuss next. 


5.Prevent Mosquitoes Using Oil

As mentioned earlier, mosquitoes are a menace to rainwater collection systems in most regions as they can quickly breed in stagnant water. So, if you’re finding it hard to keep mosquitoes from spawning in the collected rainwater, try adding a bit of oil. 

Oil will float on the water surface, and you will be able to use almost all the water beneath the surface without oil spreading into the garden. Plus, the oil creates a film across the top, which acts as the perfect barrier against mosquitoes, preventing them from breeding on the surface. 

This technique is quite simple on the whole, and you’ll require only one tablespoon of oil for the majority of tanks. 



With that, we’re about to wrap up our guide; hopefully, now you’re better equipped to keep the water fresh in your rainwater tank

Within days of using fresh rainwater on your plants, you’re bound to notice a significant improvement in their health. Additionally, you can use the water for washing your car and doing laundry.  

But that’s not all, as adequately filtered rainwater is also fit for drinking. Just make sure you’re using food-grade materials complying with the Australian standards to keep the rainwater fresh. 

Before we bring down the curtains, let’s share with you another nifty tip. Using the right fittings and pipes for your rainwater tank is also crucial for maintaining the freshness of the rainwater. Notably, PVC piping is of two types – with and without lead, and we recommend going for the latter type as they’ll keep the water safe for all purposes. 

Till next time, take care! 

What Damage Can Blocked Gutters Cause? | All Day Plumbing

What Damage Can Blocked Gutters Cause?

Although blocked gutters are a common problem faced by Australian residents, it’s not something that is to be taken lightly.

The reason is that gutters play a crucial role in carrying rainwater away from your house. If they are blocked with leaves and debris, it can put your home at risk of water damage and other disasters, leading to expensive repairs and sleepless nights. 

Unfortunately, homeowners often overlook the guttering system since it is a part of their homes that stays “out of sight, out of mind”. But we highly suggest that you do not ignore your gutters any longer and start cleaning them regularly as part of home maintenance. 

In this article, we have discussed all the damages that a blocked gutter could potentially cause to help you understand the importance of taking care of your guttering systems. Without further ado, let’s begin!


What Are The Damages That Blocked Gutters Can Cause? 

These are some of the risks associated with blocked gutters:


1. Roof Damage

When your gutters are blocked, rainwater is bound to pool on your roof and eventually damage it. If you don’t clear the stagnant water soon, it could lead to possible leaks and cracks, and repairing a leaking or damaged roof can prove expensive. 

Furthermore, with rotting roofs, there is a high chance of mildew and mould growth. They can cause health issues, such as skin irritation, eye irritation, wheezing, cough, throat irritation and nasal stuffiness.    


2. Fire Hazards

This one doesn’t happen too often, but it is a possible danger nonetheless and should be prevented. 

Branches, leaves, and debris buildup in the gutter could potentially become a fire hazard in dry and hot weather in Australia, especially in rural areas. This is because dry leaves and branches offer the perfect environment for igniting bushfire embers. 

The main reason bushfires can be so dangerous is that they escalate quickly. If the fire isn’t stopped immediately, it can even burn down your house. So, make sure that you keep your gutters free of debris, branches and leaves.


3. Damage To Landscape

Besides preventing water from flowing freely, a blocked gutter can splash out water in unwanted areas. When there is a blockage in the gutter, the water will spill over the side and onto your gardens and flower beds, ruining your lovely landscape. Too much water on your landscape can also wash away the mulch from around your plants, hindering their growth. 

Long story short, blocked gutters can mess up your landscape entirely. Restoring your landscape may also be quite expensive, and it’s best to ensure that the gutters don’t get blocked in the first place.  


4. Shifts In Walkways And Driveways

Another major damage caused by blocked gutters is when the water enters walkways and driveways, pooling these areas. This can cause cracks in those areas and put you at risk of slipping and falling. We strongly recommend installing a leaf guard in your guttering system to prevent cracks in the driveway. 


5. Damage To Fascia Boards

There is no denying that fascia boards play a crucial role in ensuring safety in Australian homes. Attached to the lower end of the roof, they prevent moisture from entering the interior and offer strong support to the roof. 

However, since they are made of wood, they are prone to damage and rot. If your gutters are blocked and overflowing with water, then the water will most likely come in contact with the fascia boards, causing them to rot. 

Note that repairing fascia boards is pretty expensive, so you would want to make sure that you are doing everything possible to prevent a blockage in the gutters.   


6. Foundation Damage

Since blocked gutters don’t allow the rainwater to be funneled away from your home, it causes it to pool around the house. Besides seeping into your basement and lower floor, this water can easily make its way into the foundations of your home. If not fixed immediately, it can cause cracks or lead to possible expansions. 

Expansions and cracks affect the structural stability of your home and put it at risk of collapsing, which is something you must prevent at all costs. By setting up quality gutter guards, you can keep water from pooling on the roof and causing damage.     


7. Basement Flooding

Water pooling on the roof can easily make its way into your basement and lower floor, flooding them. Basement flooding is a serious concern and should be dealt with urgently as the water could come in contact with your electrical wiring and cause electric shocks. 

What’s more, it could even end up causing gas leaks, which are dangerous and pretty expensive to repair.


8. Ice Dams   

Although the weather in Australia is not as chilly compared to some of the countries in the northern hemisphere, it doesn’t mean winters are not difficult in some parts. During winters, if your gutters get blocked, ice dams can develop on the edges of your roof. Now, when these ice dams melt, it leads to the water pooling and seeping inside your house.


Final Thoughts

With that, we have come to the end of our informative guide, and we hope it has helped you gain some insights into the damages that blocked gutters cause. But before we leave, we’d like to let you in on some valuable advice.

Firstly, install a leaf protection system to prevent leaves, twigs and other unwanted items from entering your gutter. If possible, trim the tall hedges and trees away from the edge of your roof. 

You must also routinely check and clean your gutter to ensure that they are not blocked. And don’t hesitate to contact your local plumbing company if you find it difficult to remove the blockage or need help installing a leaf guard. 

On that note, it’s time for us to sign off. Until next time, take care!

How To Deal With Gas Leaks | All Day Plumbing

How To Deal With Gas Leaks

As a homeowner, it’s your responsibility to check gas fittings regularly to ensure safety. Gas leaks can lead to permanent property damage if left unchecked. 

No matter how small a leak may seem, it’s always wise to bring in professional gas fitters to examine the problem. Even the smallest gas leaks can lead to major fire hazards if you fail to repair them in time. But, before you can contact gas fitters for their assistance, you need to know some precautionary steps to minimise the damage. 

That’s why today, we’ll talk about how to detect and manage gas leaks in some easy steps. So, let’s take a look! 


What To Do If You Can Smell Gas Inside The House?


Step 1: Evacuate The House 

If you smell gas inside the house, it’s most likely coming from a leak in your kitchen gas fittings or appliances. The cooking gas can be suffocating and harmful to health if you inhale it for a long time. So, the first thing you need to do is open all the doors and windows of the house to let the gas go out.

You also need to evacuate everyone from the house to ensure they do not inhale much of the leaked gas and avoid serious health hazards. It’s best to wear a face mask to avoid any harm from the gas while evacuating the house. 


Step 2: Detect The Source 

After you’ve ensured that your family members are at a safe distance, it’s time to go to the source of the gas leak and turn it off to prevent the constant leaking of the gas. Raid your kitchen and turn off the LPG gas cylinder or the gas metre, whatever you’re using as the cooking gas. 

Plus, try to switch off all power sources and electrical appliances to avoid any electrical sparks that can lead to massive fire damage. 

But, make sure it’s safe to turn off the electrical metre box because you don’t want to get injured in the process. If it’s not safe to turn off the main power source, leave it for the professionals to handle and get out of the house as soon as possible. 


Step 3: Call For Help 

Once you are at a safe distance from the house, contact your plumber or get in touch with the local gas authority so that they can take a look at the gas leak. Never try to repair a gas leak by yourself because it can do more harm than good. 

If you live in Sydney, always contact professional gas fitters in Sydney, and wait for them to come and assess the situation. It might be a good idea to look for alternative living accommodations till the gas leak at your house is fixed. 


What To Do If You Can Smell Gas Outside? 


Step 1: Remove All Sources Of Ignition 

If you can smell gas outside the house, you might be having a gas leak in the main underground gas lines. It might be even more dangerous than a mere gas leak in the kitchen because it can impact your entire neighbourhood. 

Under such circumstances, the first thing you need to do is remove and turn off all possible ignition sources from the area, such as cigarettes, general electrical appliances, and even mobile phones. If you’re not careful about it, you might end up with a burst gas main pipe outside the house. So, avoid any ignition that can escalate the situation. 


Step 2: Contact The Local Authority 

Once you’ve detected the gas leak, don’t waste any time contacting the emergency services of your local gas authority. Do not try to fix the gas leak yourself without any professional assistance or guidance. 

Inform the local authority about the gas leak, including its location and any other important details. Wait for them to look into the matter and do the needful for repairing the leak. They will have the proper tools and equipment required to repair any gas leaks. So, immediately call their emergency phone line once you’ve detected the location of the gas leak. 


Step 3: Turn Off The Gas 

After you’ve made the local authorities aware of the situation, it’s time to turn off the source of the gas leak. The main gas metre is generally present at the front or side of the house. So, locate the gas metre and turn off the gas to prevent leakage.

Rotate the gas metre valve to the OFF sign to turn off the gas. If there’s no designated OFF sign in your gas metre, keep the handle across the gas inlet pipe at right angles to turn off the gas. Now, wait for the professionals to come and repair the leak without attempting to fix it yourself. 


How To Detect Faulty Gas Appliances?

Along with faulty gas lines, faulty gas appliances in your kitchen can also lead to gas leaks. So, it’s better to detect such gas appliances to avoid gas leaks. 

Below, we’ve highlighted certain instances that might indicate whether your gas appliances are operating properly or not. These may include:

  • Yellow flame of the gas, instead of a blue flame 
  • Deposition of soot around appliances 
  • Flames burning irregularly and in the wrong directions 
  • Unpleasant gas smells 

If any of your gas appliances are showing these characteristics, stop using them and contact professional gas fitters to repair the appliances. Ignoring such faulty gas appliances can lead to carbon monoxide poisoning. So, it’s always best to hire professional help as soon as you can. 


Final Thoughts 

If you’re facing issues with gas leaks in the kitchen in Sydney, you can always hire licensed professional gas fitters in Sydney to fix the leak. But, if you have leaks in the main gas lines, it’s best to inform the local authorities and get in touch with the gas company. 

Whatever you do, never try to fix the gas leaks yourself. Always maintain a safe distance from the leak to avoid any health issues. Also, remove all ignition sources from the vicinity to avoid fire hazards.

And with that, we’ll sign off. Until next time!